Presenting Image Files On Your Digital Camera - Epson PowerLite 7850p User Manual

note
Most digital cameras also
have the ability to play
internal slideshows.
Depending on the kind of
cable you have, you can
connect a camera with a
video or A/V out port to the
projector's or
Video
port and
S-Video
transmmit your camera's
slideshow directly to the
projector. You must press the
or button
Video S-Video
on the remote control to select
the correct signal source. See
pages 59 and 60 for details.
Presenting from a Memory Card or Digital Camera
120
■
Mode switching
Lets you choose the mode to use when presenting slideshows,
movies, or images, or editing your scenario on the projector.
In
Guide mode
appears whenever you select an item and press
In
Quick mode
pressing
Enter
pressing
Enter
, press the
Quick mode
4. When you're finished changing the settings, highlight
screen and press
Enter
each folder—even if you turn off the projector or remove the
memory card.
Presenting Image Files on Your Digital
Camera
This section explains how to project individual image files on your
digital camera using EasyMP and a USB cable connection.
Before you begin, make sure that there is no memory card in the
projector's card slot, and that your digital camera is connected to the
computer (see page 64 for details). You cannot have the camera
connected while a memory card is inserted; neither the camera nor the
card will function with EasyMP.
Follow these steps:
1. Turn on your digital camera.
2. Turn on the projector and the remote control, if they're not
already on.
3. Select EasyMP as the source by pressing the
the remote control. If your camera complies with the DCIM
standard, you'll see a
4. Use the button on the remote control to position the cursor
on the folder, and then press
, which is the default, a drop-down menu
, selecting a scenario, movie, or image file and
starts the presentation; selecting a folder and
opens the folder. To access the menus in
key.
ESC
. Your changes are permanently saved with
folder.
DCIM
.
Enter
.
Enter
on the
OK
button on
EasyMP