Solving Problems
188
If you're using Access Point mode and you're connecting to the
■
wrong network, you may be experiencing signal interference from
another network. Try resetting your access point or base station,
then restart NS Connection.
If you're using AirPort, the projector's ESSID should match the
■
AirPort network name, not the name of the AirPort base station.
To check the network name, start the AirPort Admin utility,
select your base station, and click
. The network name appears on the AirPort tab.
All Settings
Try setting your AirPort Extreme card to operate in
■
mode. To access this setting, start the AirPort Admin utility,
select your base station, click
. Finally, click the
All Settings
If you're prompted for a password when you connect, enter the
■
WEP encryption key if you're using WEP encryption.
Try connecting using IP Connect Mode. See page 95 for
■
instructions.
Restart your computer.
■
An image displayed with EasyMP appears distorted.
Because of their resolution, some JPEG images cannot be displayed
correctly. Some JPEG files from digital cameras cannot be previewed.
Files with a high compression ratio may appear blurry.
In EMP SlideMaker, PowerPoint files don't appear in the
file window.
EMP SlideMaker does not support PowerPoint 95. Files created
in this version of PowerPoint must be opened and resaved in
PowerPoint 97 or later.
. Then click
Configure
802.11b only
, and then click
Configure
tab.
Network
Show
Show