Epson PowerLite 7850p User Manual page 78

note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, press the
Num
button on the remote
control. The button lights up
to indicate that the numeric
keypad mode is active. Press
the button again to
Num
exit numeric keypad mode.
Presenting Through a Wireless Network
78
Make sure
Access point mode
use the button on the remote control to highlight the
checkbox next to
Access point mode
to select it.
3. Use the button to highlight
), then press
mode
You see this screen:
4. Make sure the projector has a unique name, so you can identify it
when connecting to it from your computer.
If you need to rename it, highlight the
, then press
Projector name
the text box. Then highlight the text box and press
cursor turns green to indicate you are in input mode. Tilt the
button up to select individual letters in alphabetical order, or
down to select letters in reverse order; then tilt the
the right to move to the next character position. When done
typing the new name, press
is selected, as shown. If not,
, then press
Advanced
to select it.
Enter
Clear
on the remote control to clear
Enter
.
Enter
Enter
(next to
Access point
button next to
. The
Enter
button to