Adjusting The Image Shape - Epson PowerLite 7850p User Manual

Epson multimedia projector user's guide
Hide thumbs Also See for PowerLite 7850p:
Table of Contents

Advertisement

Keystone correction
Keystone correction
Quick Corner correction
Displaying and Adjusting the Image
26

Adjusting the Image Shape

In most cases, you can maintain a square or rectangular image by
placing the projector directly in front of the center of the screen with
the base of the lens level with the bottom of the screen.
Even if the projector is slightly tilted (within a range of 40° up or
down), the projector has an automatic keystone correction function
that detects and corrects vertical keystone distortion.
Projector tilted up
It takes about one second after projection starts for the image to be
corrected. During this time, a vertical keystone correction gauge
appears on the screen.
If your image is still distorted, you can correct it using either of these
methods:
If the image has two parallel sides but is wider on one side (top,
bottom, left, or right), you can correct it using the
on the projector's control panel or the projector's Keystone menu
(see "Using Keystone Correction" on page 27).
If the image has no parallel sides, you can adjust its shape using
Quick Corner
(see page 37).
You cannot use both keystone correction and Quick Corner at the
same time.
Corrected image
Projector tilted down
keys
Keystone

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerlite 7850pnl

Table of Contents