8. When done making these settings, highlight the
top of the screen (you can either press the
remote control or use the
. Highlight the
Enter
to the main EasyMP Network Screen.
Now you're ready to set up your computer for wireless projecting. Go
to "Configuring the Network Settings for Windows" below, or
"Setting Up Your Macintosh for Ad Hoc Mode" on page 75.
Configuring the Network Settings for Windows
Before connecting to the projector, you need to make sure the settings
for your laptop's or PC's network card match the settings you entered
for the projector.
1. Access your wireless network Properties window. For example, in
Windows XP you would click
and Internet Connections
icon.
Connections
You see a screen similar to this:
2. Right-click the
Wireless Network Connection
.
Properties
ESC
button to highlight it), then press
button again and press
OK
Start > Control Panel > Network
. Then click the
Right-click and select Properties
button at the
OK
button on the
to return
Enter
Network
icon and select
Presenting Through a Wireless Network
note
On some Windows systems,
you can right-click
or
My Network Places
Network Neighborhood
on the desktop and select
.
Properties
73