note
You must be projecting an
image for this button to have
any effect. The
button
Auto
works only with computer
images.
Displaying and Adjusting the Image
28
Correcting Computer Images
If you're connected to a computer and the image doesn't look right,
press the
button on the remote control (or the
Auto
button on the projector's control panel). This automatically resets the
projector's tracking, sync, resolution, and position settings.
If vertical bands appear in the projected image and the
doesn't correct the problem, hold down the
projector's control panel while pressing either the
button.
Tracking -
If the image appears fuzzy or flickers and the
correct the problem, hold down the
the
or
button.
Sync +
Sync -
Auto/Enter
Auto button
Auto
button on the
Shift
Tracking +
button doesn't
Auto
button while pressing either
Shift
button
or the