Paper Size - Fujitsu fi-5120C Operator's Manual

fi-5120C / fi-5220C Image Scanner Operator
Guide
2.5 How to Use the Scanner Driver (4)
2. Setting Window for FUJITSU TWAIN32 Scanner Driver
You can configure settings for the FUJITSU TWAIN32 Scanner Driver on this window.
The following describes the main setting items.
For details on each functions, refer to "FUJITSU TWAIN32 Scanner Driver Help"
●
(appears by pressing [Help] or [F1] button).
Depending on the type of your scanner, available setting items or range of setting values vary.
●
Resolution
Specifies the resolution of scanning.
It can be specified by selecting a default value from the list or customizing (specify any resolution in 1 dpi unit).
By marking the [Predefine] checkbox, you can select one from three predefined settings as [Normal], [Fine], [Super
Fine] to scan documents instead of setting details by yourself.
Otherwise, you can change the details of the predefined settings on the [Resolution Setting] window, which appears
when you click on the [...] button.
Scan Type
Specifies the feeding method, the side(s) to be scanned (Front Side, Back Side, Duplex, flatbed[fi-5220C only]) or
details of Long page (the size of documents longer than A4).

Paper Size

Selects the size of documents to be scanned from this list.
Windows for customizing the paper size will appear when you click on [...] besides the list. You can save any
document size as a customized setting (up to three) or for changing the order of the paper size in the list.
1 2 3 5 6
4
1 2 3 5 6
4
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
7 8 9 10 11
7 8 9 10 11
TROUBLE SHOOTING
CONTENTS MAP
TOP
12 13 14 15
12 13 14 15