Fujitsu fi-5120C Operator's Manual page 115

fi-5120C / fi-5220C Image Scanner Operator
Guide
6.1 Removing Jammed Documents (2)
4. Press down on the center of the ADF to return it to its original position and lock the ADF button.
Press center of ADF
ATTENTION
Make sure that the ADF is completely closed. When it is not completely closed,
●
document jams or feeding errors may occur.
When the scanning is completed or canceled, the documents might remain inside the
●
ADF even though any error message is not displayed.
Follow the procedure below to remove the documetns remaining in the ADF.
1. Remove all documents from the ADF paper chute.
2. Open the ADF by pushing down the ADF button.
3. Remove the remaining documents.
4. Push in the center of the ADF to close it until the ADF button is locked.
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
1 3
2
1 3
2
TROUBLE SHOOTING
CONTENTS MAP
TOP