Load The Document On The Adf Paper Chute - Fujitsu fi-5120C Operator's Manual

fi-5120C / fi-5220C Image Scanner Operator
Guide
2.2 Loading Documents on the ADF for Scanning
(2)

3. Load the document on the ADF paper chute.

Pull out the ADF paper chute extension.
Set the documents face-down in the ADF paper chute (so that the side to be scanned faces towards the ADF
paper chute).
ATTENTION
This scanner can scan ID cards through the Automatic Document Feeder with the following
precautions.
Load the document facing the ADF paper chute.(face down)
Place one card at a time into the Auto Document Feeder.
●
ID card feeding requires the card to be fed through the Auto Document Feeder in
●
portrait mode as in the following figure.
Smooth cards should be placed face down in the Auto Document Feeder.
●
Embossed cards (raised lettering) should be placed with the embossed side down.
●
1 3 4
2
TROUBLE SHOOTING
CONTENTS MAP
TOP