Fujitsu fi-5120C Operator's Manual page 127

fi-5120C / fi-5220C Image Scanner Operator
Guide
6.3 Remedying Typical Troubles
Symptom: Images are distorted or blurred.
Back
Are the upper/lower glasses inside the ADF, the
document bed, and the document holding pad clean?
Is the ADF cover pressed down or heavy object
placed on the ADF during scanning?
Is something causing the scanner to vibrate during
scanning?
Is the scanner installed on a flat, level surface?
If you cannot solve the problem after taking
measures, check the items in
before contacting the dealer where you bought the
scanner" and contact the dealer or an authorized
FUJITSU scanner service provider.
*)For details on how to clean dirty locations, see
YES
NO
NO
YES
"6.4 Items to check
"Chapter 4 DAILY
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
Clean dirty locations. (*)
NO
Do not press down the ADF or place heavy object on
the ADF during scanning.
YES
Do not allow anything to cause the scanner to
vibrate while scanning.
YES
Install the scanner on a flat, level surface.
NO
CARE".
TROUBLE SHOOTING
CONTENTS MAP
TOP