Cleaning Materials - Fujitsu fi-5120C Operator's Manual

fi-5120C / fi-5220C Image Scanner Operator
Guide
4.1 Cleaning Materials and Locations requiring Cleaning

Cleaning Materials

The table below shows the cleaning materials that are used on this scanner.
Cleaning Materials Part No.
Cleaner F1
Cleaning Wipe
Soft, dry cloth
*1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner
parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely
with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.
For details on Cleaner F1, consult the agent where you bought your scanne or an authorized
Locations and Cycle for Cleaning
Pad ASSY
Pick roller
Feed roller
Plastic roller
Glass
Document holding pad
Document bed
ATTENTION
The scanner must be cleaned more frequently when the following documents are used:
PA03950-0352(*1)
PA03950-0419
Commercially available. Any lint-free cloth can be used.
Location
Documents of coated paper
●
Documents with printed text or graphics almost covering the entire surface
●
Chemically treated documents such as carbonless paper
●
Documents containing a large amount of calcium carbonate
●
Documents written by pencil
●
Documents on which the toner is not fused sufficiently
●
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
Remarks
1 bottle (100 ml)
Moisten cloth with this fluid and wipe the scanner
clean.
24 sheets/pack
Pre-moistened with Cleaner F1, Cleaning Wipes are
used instead of moistened cloths.
Standard Cleaning Cycle
Clean every 1,000 scanned sheets.
TROUBLE SHOOTING
CONTENTS MAP
TOP
FUJITSU service providerr.