5. Adjustment of Presser Foot Height
1. Turn the power switch off.
2. Select the needle bar No. 1.
3. Loosen the screw w of the presser foot q, and adjust the presser foot q until it comes
above the cloth top surface when it is at the alignment position (where the pulley B indication
mark " " and the cover indication mark " " are aligned).
6. After timing adjustment the is finished for
each head, set the pulley B q to the stop
position (at 100˚ of the scale) and press
ESC
ESC
state.
The adjustment of the rotary hook is
completed and the timing is stored. The
rotary hook returns to the stop position
accordingly.
BES-941BC • BES-1241BC
Chapter 8 Standard Adjustment
. The machine enters the standby
w
q
material
155