Setting of thread breakage error resetting method
4.
Select
by pressing
5.
Press
for modifying a resetting method.
For setting whether to stop embroidering temporarily at the mending
stop point
4.
Select
by pressing
5.
Press
and select whether to stop embroidering temporarily.
Setting of thread trimming method after stopping
4.
Select a thread trimming method by pressing
Setting of mending stop position
4.
Select a stop point (number of stitches before mending) by pressing ten
keys.
The machine does not stop if the automatic step-back setting is lower than the input value.
After setting all items, press
Modified setting is saved and the initial screen is displayed again.
BES-941BC • BES-1241BC
.
.
Modify this figure.
.
E N D
Chapter 5 Setting
.
101