Thread Trimming Length; Thread Withdrawal Feed Length - Brother BES-1241BC Instruction Manual
Nine needle four head electronic embroidery machine; twelve needle four head electronic embroidery machine
Hide thumbs
Also See for BES-1241BC:
- Parts manual (143 pages) ,
- Instruction manual (16 pages) ,
- Maintenance manual (14 pages)
Table of Contents
Advertisement
Chapter 5 Setting
Length of thread to leave on the needle bar after thread trimming can be set for
each needle bar.
1.
2.
3.
4.
5.
6.
Thread withdrawal length can be set before thread trimming.
102
Thread Trimming Length
This function is previously set to 5 upon shipments.
Press
.
Select
by pressing
Press
.
Select a needle bar to modify by pressing
Press
for setting the same speed range for all needle bars.
Input thread length by pressing ten keys.
Thread length can be input within the range of 1 ~ 10. Length decreases as the figure decreases.
When inputting "10", press the
After setting is finished with all needle bars, press
Modified setting is saved and the previous screen is displayed again.
Thread Withdrawal Feed Length
The input range is 0 ~ 100mm.
This function is previously set to 15mm upon shipments.
BES-941BC • BES-1241BC
.
0
first.
SPACE
.
.
E N D
- Quick Links:
- Electrical Section
Hide quick links:
Advertisement
Table of Contents
