Setting Of Machine; Embroidery Hoop - Brother BES-1241BC Instruction Manual

Setting of Machine

Machine motions can be set.
Specify a type of an embroidery hoop set on the machine.
1.
2.
3.
4.
5.
6.

Embroidery Hoop

A type of a hoop to be selected varies depending on a type of a hoop (flat or cap)
selected by a switch on the operation panel.
When a flat hoop is selected
When a cap hoop is selected
All heads or every other head can be selected by pressing
All heads
Every other head (Only heads No. 1 and No. 4 are operated.).
When operating every other head, refer to "4-5 Flat Frame Every Other Head
Operation" ( Page 45) and remove the presser feet of heads No. 2 and No. 3.
Press .
Select by pressing
Press .
Select a type of a hoop by pressing
Select either all heads or every other head by pressing
Press .
E N D
Modified setting is saved and the previous screen is displayed again.
BES-941BC • BES-1241BC
Tabular square hoop
Sash frame
Flat hoop
Semi-wide cap frame
Wide cap frame
.
.
All heads or every other head as
currently selected
Currently selected hoop
Chapter 5 Setting
.
.
97