What Can The Machine Do - Brother BES-1241BC Instruction Manual

Chapter 5 Setting

What Can the Machine Do?

90
Setting of Needle Bars
Needle bars allocated in the sequence of embroidering (
Setting of Thread Breakage Sensor
Thread breakage sensor ON/OFF (
Thread breakage sensitivity (
Number of stitches in automatic step back (
Display of total stitch number in automatic step back
Lower thread counter counts (
Stitch counter indication (
Setting of Machine
Selection of embroidery hoop (
Display of every head/every other head (
Speed range (
Speed in speed range (
Thread trimming length (
Thread removal feed length (
Inching ON/OFF (
Sewing area (
Resetting of thread breakage error (
Needle bar stop at mending stop point (
Method of thread trimming before thread breakage error (
Method of thread trimming before stop (
Setting of Environment
Return to start point after embroidering end (
Method of reflecting modified machine speed (
Method of checking the embroidery area (
Power voltage (
BES-941BC • BES-1241BC
Page 94)
Page 94)
Page 96)
Page 96)
Page 97)
Page 98)
Page 99)
Page 102)
Page 102)
Page 103)
Page 104)
Page 109)
Page 92)
Page 95)
Page 97)
Page 101)
Page 101)
Page 101)
Page 101)
Page 107)
Page 107)
Page 108)