Other Editing - Brother BES-1241BC Instruction Manual

Chapter 4 Editing of Embroidering Data

Other Editing

Setting of other functions related to editing is available.
The following types of setting is available.
1.
2.
0 Stitch Deletion
3.
4.
86
0 stitch deletion
Thread trimming feed number
Swing width correction
Read sewing data.
Press three times.
Select this function by pressing
Press after setting is finished.
E N D
Press when setting continuously.
BES-941BC • BES-1241BC
For deleting stitches at the same point without
stepping forward or back.
This function is previously set to
0stitch)upon shipment.
For deleting 0 stitch
For not deleting 0 stitch
For setting the number of feeds for thread trimming
This function is previously set to
or (Except ECS data)upon shipment.
~ For thread trimming at the number of feeds
indicated on the icon
For not thread trimming by feeding
For setting the needle swing width correction amount
The correction amount can be set in increments of 0.1mm.
The setting range is -0.5 ~ 2.0mm in both the X and
Y directions. (The setting range is displayed as "-5
~ 20" on the screen.)
This function is previously set to 0(no swing width
correction)upon shipment.
.
(for not deleting
(ECS data)