Feed Timing - Brother BES-1241BC Instruction Manual

2. Press the
END
The changed settings are stored and the previous screen is displayed.

Feed Timing

The timing of needle drop and hoop movement can be adjusted according to the
cloth thickness.
The value can be designated between 95 and 125 degrees in 1-degree units.
The smaller values are suitable for thick material and the larger ones are suitable
for thin material. The standard value is 110 degrees.
1. Press
three times.
2. Select with
3. Press .
4. Designate the feed end angle with
5. Press the
END
The changed settings are stored and the previous screen is displayed.
BES-941BC • BES-1241BC
button.
.
button.
.
Chapter 5 Setting
119