Brother BES-1241BC Instruction Manual page 30

Chapter 1 Preparation of Embroidery Machine
Procedure to mount F table when using the flat frame and the sash frame
u
1. Dismount the F table R t, M y, and L u once, and lower the F table support F e. Then,
place the F table R t, M y, and L u on the F table guide L w bending section. Fix the F table
support F e at this height and insert the pins on the rear of the F table R t, M y, and L u
into the holes of the F table stopper r.
Note) Fix the F table stopper and the F table guide L securely at this position.
2. Insert the F table R t, M y, and L u into the upper and lower positions respectively, then
check if the table can be securely fixed by the drilling bolts i. If not, shift the F table support
F e to the right and left for further adjustment.
28
e
i
w
y
BES-941BC • BES-1241BC
t
r
e
w