Brother BES-1241BC Instruction Manual page 130

Chapter 6 Operation of Machine
No.1 Stitch
Stand by
position A
No.1 Stitch
B
Stand by
position A
When a thread breakage error is occurring, refer to "Setting of Mending" (
order to correct missing stitches caused by a thread breakage.
128
No.2 Stitch No.3 Stitch
No.3
Mending LED is off.
No.2 Stitch No.3 Stitch
Mending LED
BES-941BC • BES-1241BC
1. Turn off the MENDING lamp No. 3 at the
standby position A.
(The position A should be the mending end
position.)
2. Press the jog
backward.
Turn off the MENDING lamp No. 2 at the
position B.
(The position B does not become the end
position; the position A remains the end
position.)
Note) When the MENDING switch of the machine
head whose lamp is off is pressed:
• The MENDING lamp of the machine head is
lit, and mending is executed for the ma-
chine head.
Note) When the MENDING switch of the machine
head whose lamp is on is pressed:
• The MENDING lamp of the machine head
goes off and mending is not excuted for the
machine head.
switch or to move it
Page 100) as well in