Importing A File; Exporting A Design - Brother BES-100E Workbook

Importing a file
To import a file (for example in the .cnd and .kwk formats):
1
On the drop-down menu, click
File
2
In the
Files of type
3
In the drop-down list and the list below it, select the folder containing the desired file, and then
Look in
select the file that you wish to import.
NOTE: To view thumbnails of the files, click the
To search for a specific file in the design library, click the
dialog box appears. For more information about this dialog box, see Searching the design library
in chapter 28.
For information about opening a file that is not in a DOS format, see Opening non-DOS files
below.
4
Click the button.
Open
NOTE: The files that can be imported can also be opened by clicking
then selecting "All Files (*.*)" in the
selected folder are displayed.

Exporting a design

To export a design into a file with the DOS condensed format:
1
Open the design that you wish to export.
2
On the drop-down menu, click
File
3
In the drop-down list and the list below it, select the location where you wish to save the exported
Save in
file.
NOTE: To save the file on a floppy disk, insert one into the floppy disk drive, and then select "3 1/2
Floppy".
4
In the box, type the desired file name.
File name
5
Click the button. The design is exported as a .cnd file.
Save
62
Import
drop-down list, select the format for the file that you wish to import.
Export
. The dialog box appears.
Import
button. The
Thumbnails
drop-down list. All the DOS-based files saved in the
Files of type
. The dialog box appears.
Export
dialog box appears.
Thumbnails
button. The
Search Library
on the drop-down menu,
Open File
Search Library