Brother BES-100E Workbook page 88

To reposition the text shape:
G
Using the tool (
Move
H
Move the pointer over the text shape, and then drag it the desired position, using the grid to align it.
To output the design:
I
Insert a floppy disk into the floppy disk drive of your computer.
J
On the drop-down menu, click
File
NOTE: A design can also be output by clicking the
K
In the drop-down list on the
Machine
L
In the box, type "Dogclub".
File name
M
Click the button. The design is saved on the floppy disk as a .dst file (a stitch file), which is a file format
OK
that the machine can read.
NOTE: To save this design as a .bdf file (which can be edited), click
The
Save As
drop-down list, and then type "Dog Club" in the
the
Save as type
), select the text shape. "Dancing ants" (moving dashes) appear around it.
Output Design
General
dialog box appears. Select the "DESIGNS" folder of the "BES" folder in the
drop-down list, and then click the
. The
Output Design
Output Design
tab, select "Brother".
File name
button.
Save
dialog box appears.
button ( ) in the
Ribbon
on the
Save As File
box. Next, select "BES Files (*.bdf)" in
bar.
drop-down menu.
Save in
85