Using The Double Arch Text Tool; Using The Single Arch Text Tool - Brother BES-100E Workbook

Using the Double Arch Text tool (

This tool arranges text inside an outline that is arched on both the top and bottom. The arches bow in oppo-
site directions and can bow either in or out.
3
1
To create a text shape using the
1
Click the
Double Arch Text
2
Click in the design area to specify the desired location for the left end of the baseline (1 in figure 32).
3
Click in the design area to specify the desired location for the right end of the baseline (2 in figure 32).
4
Click above the baseline to specify the desired height of the text (3 in figure 32).
5
Drag the lower arch of the outline until the arches have the desired curve (4 in figure 32). The
the
Text Properties
6
In the box, type the desired text.
Text
7
Click the button.
OK

Using the Single Arch Text tool (

This tool arranges text inside an outline that is arched on both the top and bottom. The arches bow in the
same direction and can bow either up or down.
3
1
To create a text shape using the
1
Click the
Single Arch Text
2
Click in the design area to specify the desired location for the left end of the baseline (1 in figure 34).
3
Click in the design area to specify the desired location for the right end of the baseline (2 in figure 34).
4
Click above the baseline to specify the desired height of the text (3 in figure 34).
5
Drag the lower arch of the outline until the arches have the desired curve (4 in figure 34). The
the
Text Properties
6
In the box, type the desired text.
Text
7
Click the button.
OK
24
Figure 32
4
Double Arch Text
tool ( ) in the
dialog box appears.
Figure 34
4
Single Arch Text
tool ( ) in the
dialog box appears.
)
2
tool ( ):
palette.
Lettering
)
2
tool ( ):
palette.
Lettering
Figure 33
Figure 35
tab of
Text
tab of
Text