Brother BES-100E Workbook page 99

Programmable Run Stitch
(
"Memorize" Maintenance
Programmable Fill Stitch
(
"Memorize" Maintenance
Pull compensation box
( tab of corresponding
Stitches
or fill.
Punchpoints
Used to specify the parameters of a graphic shape.
Purge button
( dialog box) Used to delete all files from the selected floppy.
Output Design
Recall button
( tab of the
Fabric Settings
and and
Stitches
be selected for later use.
Repair Library button
( tab of
Utilities Library Maintenance
from the design library and rebuilds the design library using only designs on local hard disks.
Refresh button
( dialog box) Used to refresh the display when the floppy in the floppy drive is changed.
Output Design
Set Entry Point
(on
Punchpoints
design shape begins.
Set Exit Point
(on
Punchpoints
design shape ends.
Show/Hide
(on drop-down menu) Allows certain parts of the design to be specified as being displayed or hidden
View
in order to facilitate editing.
Speed Keys
(on drop-down menu) Allows keyboard shortcuts for frequently used commands to be pro-
Options
grammed in the digitizing level of the software. Preset speed keys appear on the drop-down menus to the
right of the command.
Split Manual Stitches
(on
Punchpoints
trims and color changes in stitch files.
spool
Procedure for storing information temporarily in a file while awaiting further processing
Start and stop points check box
( dialog box) Used to display the needle position, indicated by a green circle with red accents
Markers
inside it, before and after the design is sewn. The default is the center of the design.
Stitch back box
( group box on
Half stitches
towards the inner edge the half stitch will fall.
Synchronize Library button
( tab of
Utilities Library Maintenance
design library, and add all designs on local hard disks to the library. Usually, this is done when you have
been working outside of BE-100.
96
dialog box) Preprogrammed or user-created fancy patterned running stitch
dialog box) Preprogrammed or user-created patterned fill stitch
Properties
dialog box,
Design Info
tabs of the
Running Stitches
dialog box) Used to remove all designs, including CD ROM designs,
drop-down menu) Specifies the selected punchpoint as the one where sewing of the
drop-down menu) Specifies the selected punchpoint as the one where sewing of the
drop-down menu) Splits a manual stitch into two separate stitches, and is used to create
tab of corresponding
Stitches
dialog box) Used to remove designs that have been deleted from the
dialog box) Used to specify an increase in the width of a column
and
Text Effects
dialog box) Allows a set of custom settings to
Shape Properties
Properties
tabs of the
Stitches Text Properties
dialog box) Used to specify how far
dialog box,