Brother BES-100E Workbook page 97

Feed
Jump stitch
Fill group box
( tab of corresponding
Stitches
and the distance that subsequent rows of stitches are offset from another (
Glyph connection group box
( tab of
Commands
are connected.
Group
(on drop-down menu) Groups design shapes. Once grouped, the shapes act as a single unit.
Shape
Half stitches group box
( tab of corresponding
Stitches
or corner to alleviate compression on the inner portion, thereby eliminating possible thread breaks, nee-
dle breaks and holes in garments.
Horizontal border box
(
Underlay stitches
tance between the horizontal edges of the underlay and the edge of the design shape's outline.
Insert Point Before
(on
Punchpoints
during reshaping.
Insert Point After
(on
Punchpoints
during reshaping.
Inside gap box
( group box on
Half stitches
density of half stitches as a percentage of the outside.
Jagged edges group box
( tab of corresponding
Stitches
applied for decorating the edge of satin stitches (on a column or region), for example, a scallop or a ran-
dom shaggy pattern.
Load CD ROM Designs button
( tab of
Utilities Library Maintenance
color changes, size, etc.) onto the hard disk to be used with the design library. The actual designs are not
loaded and must still be accessed through the CD.
Maintain aspect ratio check box
( tab of
Text Text Properties
line is too short to accommodate the set text height. Same as clicking the
( ) in the
Text
Markers
(on drop-down menu) Allows you to specify which of the colored symbols that identify specific details
View
of a design should be displayed.
Medium sized stitches check box
( tab of
Text Effects
the usual side-to-side stitches when creating small text.
"Memorize" Maintenance
(on drop-down menu) Allows previously memorized stitches and settings to be edited, renamed,
Options
or deleted.
94
Properties
dialog box) Used to determine how characters in the selected text shape
Text Properties
Properties
group box on
Stitches
drop-down menu) Adds a new punchpoint before the selected one, providing finer control
drop-down menu) Adds a new punchpoint after the selected one, providing finer control
tab of corresponding
Stitches
Properties
dialog box) Used to load information about all CD designs (# of stitches,
dialog box) Used to prevent lettering from becoming distorted when a fixed base-
bar.
dialog box) Used to specify whether diagonal stitches are used instead of
Text Properties
dialog box) Used to specify the length of fill stitches (
dialog box) Used to specify the sewing of short stitches in a curve
tab of corresponding
Properties
dialog box) Used to specify programmable stitches which may be
box), like brickwork.
Offset
dialog box) Used to specify the dis-
Properties
dialog box) Used to specify the inner
Maintain Aspect Ratio
box)
Length
button