Outputting A Design Containing Templates - Brother BES-100E Workbook

Outputting a design containing templates

To output a design that contains templates:
1
On the drop-down menu, click
File
2
On the tab, edit the template data as desired. For more information, see Editing template text
Template
data above.
NOTE: All templates are selected unless specific ones are picked. To output specific templates, select
the desired rows. For more information, see Editing template text data above.
When sewing multiple copies of the design, specify the following settings on the
• In the
Repeat
to bottom (
• In the
Spacing
) and the desired amount of vertical spacing between copies (
zontal
measured from the center of one design to the center of the next.
3
In the drop-down list on the
Machine
with.
4
Click the button. The text file "report.txt" (opened in the
OK
have been output to the machine or floppy disk. Since these files are numbered, make note of the name
and content of each file for future reference. In addition, this report can be printed so the machine opera-
tor can see the exact file name and the file's contents.
NOTE: Carefully read any instructions that appear.
Output Templates
group box, type the number of copies to be sewn left to right (
).
Vertical
group box, type the desired amount of horizontal spacing between copies (
tab, select the type of machine that you wish to sew the design
General
. The
Output Templates
Figure 70
application) appears, listing all files that
Notepad
Figure 71
dialog box appears.
Patches
Horizontal
). The spacing is
Vertical
tab:
) and top
Hori-
37