Using The Arc By Circle Text Tool - Brother BES-100E Workbook

To create a text shape using the
1
Click the tool (
Arc Text
2
Click in the design area to specify the desired location for the left end of the baseline (1 in figures 42 and
43).
3
Click in the design area to specify the desired location for the right end of the baseline (2 in figures 42
and 43).
4
Drag the baseline until it has the desired curve (3 in figures 42 and 43).
5
Click above the curved baseline to specify the desired height of the text (4 in figures 42 and 43). The
tab of the
Text Properties
6
In the box, type the desired text.
Text
7
Click the button.
OK

Using the Arc by Circle Text tool (

This tool arranges text that flows either clockwise or counterclockwise along an arc whose beginning, end
and radius you can specify.
6
2
3
To create a text shape using the
1
Click the
Arc by Circle Text
2
Click in the design area to specify the center of the circle (1 in figures 44 through 47).
3
Drag the pointer until the circle has the desired radius and the cut in the circle, which specifies the begin-
ning of the text, is at the desired position (2 in figures 44 through 47).
tool (
Arc Text
) in the
Lettering
dialog box appears.
Figure 44
4
1
Figure 46
6
2
1
4
Arc by Circle Text
tool ( ) in the
):
palette.
)
3
3
tool ( ):
palette.
Lettering
Figure 45
6
2
1
5
Figure 47
5
2
1
Text
3
6
27