Chapter 23: Navigating The Design; Navigating Through The Design; Selecting Alternating Punchpoints - Brother BES-100E Workbook

Embroidery software

Table of Contents

The buttons in the

Navigation

shapes or punchpoints.

Navigating through the design

To navigate through the design by selecting design shapes or punchpoints:

To select how to navigate through the design, do one of the following:

To navigate by design shapes, click the

To navigate by punchpoints, click the

To select a speciﬁc punchpoint or design shape, do any of the following:

To navigate through the design by selecting every single, every tenth, every hundredth or every thou-

sandth punchpoint or design shape, click the desired select-by-number button (

palette.

Navigation

NOTE: If the

selected is added to the selection. In that way, instead of selecting hundreds of punchpoints

one by one, 10, 100, or even 1000 punchpoints at a time can be selected until all the desired

points are in the selection.

To select the previous or next punchpoint or design shape depending on the select-by-number button

(

in the

Navigation

NOTE: The previous and next punchpoint or design shape can also be selected by pressing the left

and right cursor keys of the keyboard.

To select the ﬁrst or last punchpoint or shape in the design, click the

button (

Select Last

NOTE: The ﬁrst and last punchpoint or design shape can also be selected by pressing the Home and

End cursor keys of the keyboard.

Selecting alternating punchpoints

Punchpoints on one side of a satin-stitched region are paired with punchpoints on the other side. Therefore,

by selecting alternating punchpoints of a satin-stitched region, you can reshape just one side of the region

without changing the other.

To select alternate punchpoints:

Click the

Select Alternating

Click the

Reshape

punchpoint changes to light blue.