Using The Flat Top Arch Text Tool; Using The Flat Bottom Arch Text Tool - Brother BES-100E Workbook

Using the Flat Top Arch Text tool (

This tool arranges text inside an outline that is flat on the top and arched on the bottom. The bottom can bow
either in or out.
3
1
To create a text shape using the
1
Click the
Flat Top Arch Text
2
Click in the design area to specify the desired location for the left end of the baseline (1 in figure 28).
3
Click in the design area to specify the desired location for the right end of the baseline (2 in figure 28).
4
Click above the baseline to specify the desired height of the text (3 in figure 28).
5
Drag the arch of the outline until it has the desired curve (4 in figure 28). The
dialog box appears.
6
In the box, type the desired text.
Text
7
Click the button.
OK

Using the Flat Bottom Arch Text tool (

This tool arranges text inside an outline that is arched on the top and flat on the bottom. The top can bow
either in or out.
3
1
To create a text shape using the
1
Click the
Flat Bottom Arch Text
2
Click in the design area to specify the desired location for the left end of the baseline (1 in figure 30).
3
Click in the design area to specify the desired location for the right end of the baseline (2 in figure 30).
4
Click above the baseline to specify the desired height of the text (3 in figure 30).
5
Drag the arch of the outline until it has the desired curve (4 in figure 30). The
dialog box appears.
6
In the box, type the desired text.
Text
7
Click the button.
OK
Figure 28
4
Flat Top Arch Text
tool ( ) in the
Figure 30
4
Flat Bottom Arch Text
tool ( ) in the
)
2
tool ( ):
palette.
Lettering
)
2
tool ( ):
palette.
Lettering
Figure 29
tab of the
Text Text Properties
Figure 31
tab of the
Text Text Properties
23