Brother BES-100E Workbook page 35

5
Click the button. The text appears as shown below.
OK
6
Using the
Move
shape.
7
Click the
Text Effects
appears.
8
In the
Character kerning
9
Click the button. The text appears as shown below.
OK
To adjust the kerning between specific characters:
0
Click the
Reshape
A
Click the kerning handle between the "F" and the first "o". The kerning handle changes to light pink.
B
Drag the handle towards the "F".
C
Click the kerning handle between the "a" and the first "l".
D
While holding down the Ctrl key, click the kerning handle between the two "l"s.
E
Press the Num Lock key to turn on Num Lock.
F
Press the number key 4 of the numeric keypad to nudge the kerning handles until the text has the charac-
ter spacing as shown in figure 61 above.
32
tool ( ), select the text shape. "Dancing ants" (moving dashes) appear around the
button ( ) in the
group box, select
tool ( ) in the
Stock
Figure 62
bar. The
Text Text Effects
, and then type "80%" in the
Custom
Figure 63
toolbar. The kerning handles appear in magenta.
Figure 64
tab of the
Text Properties
box.
Custom
dialog box