Installing The Remote Unit; Attach Wall Mount Brackets; Connect Monitor And Speakers; Figure 4- Attach Wall Mount Brackets To Remote Unit - Network Technologies XTENDEX ST-C5VA-WL500 Installation And Operation Manual

NTI XTENDEX Wall Mount Extenders

Installing The Remote Unit

The Remote Unit can either set on a desk near the monitor and speakers to be connected, or it can be mounted to a vertical
surface using the wall mount brackets provided.

Attach Wall Mount Brackets

The two wall mount brackets can be secured to the Remote Unit using the four #4-40 x 1/4" screws provided (see Fig. 4).
the brackets attached, mount the Remote Unit to any desired surface using suitable hardware (not included). Be sure to position
the Remote Unit such that the CAT5 cable, the monitor cable, and the speakers cable can each reach the Remote Unit without
putting strain on the cables.

Connect Monitor and Speakers

1. Position the Remote Unit such that the CAT5 cable, the monitor cable, and the stereo audio cable can each reach the
Remote Unit without putting strain on the cables.
2. Connect the monitor cable to the female 15HD video connector on the Remote Unit.
3. Connect the cable from the remote speakers to the 3.5mm stereo audio jack on the Remote Unit (see Fig. 5).
Rear View of Remote Unit
Inc
3.5mm Stereo
Audio Jack
ST-C5VA-WL500
Remote Unit
(Bottom View)

Figure 4- Attach wall mount brackets to Remote Unit

15HD Female
Video Connector
XTENDEX
Technologies Network
NTI
R

Figure 5- Connect monitor and speakers to the Remote Unit

4-40X1/4" Flat Head Screw
Wall Mount Bracket
7
VGA
Multi-Scan
Monitor
Stereo
Speakers
With