Figure 2- Connect The Remote Unit To A Display; Figure 1- Connect The Vopex To A Video Source And Local Monitor - Network Technologies VOPEX-C5HDMI-4 Installation And Operation Manual

NTI VOPEX HDMI Splitter/Extender
3. Connect an HDMI-xx-MM cable between the "HDMI OUT" port on a Remote Unit and a display with an HDMI input.
HDTV MONITOR
W/HDMI INPUT
4. Connect an HDMI-xx-MM cable between the "HDMI IN" port on the VOPEX and an HDMI video source. Connect another
HDMI-xx-MM cable between the "HDMI OUT" port on the VOPEX and a display with an HDMI input (optional).
Local Monitor
HDTV MONITOR
W/HDMI INPUT
(using a local monitor is optional)
5. Power ON the display first, then the video source.
HDMI-A-Male
HDMI-xx-MM
(3,6,14,20 and 30 foot cables available)
Figure 3- Connect the remote unit to a display
Cable Box
W/ HDMI
Output
HDMI Type A
Male
(3,6,14,20 and 30 foot cables available)
(3,6,14,20 and 30 foot cables available)
Figure 4- Connect the VOPEX to a video source and local monitor
Front View of ST-C5HDMI-150 Remote Unit
HDMI-A-Male
Rear View of VOPEX-C5HDMI-4
HDMI-A-Male
HDMI-xx-MM
HDMI-A-Male
HDMI-xx-MM
7
HDMI OUT
HDMI IN HDMI OUT
12VDC
-
+