NTI XTENDEX Wall Mount Extenders
Connect the CPU
1. Connect the VEXT-6 video cable (provided) to the male 15HD connector on the Local Unit labeled "VIDEO IN".
Connect the other end of the cable to the video port on the CPU (see Fig. 2).
2. Connect the SA-6-MM audio cable (provided) between the connector on the Local Unit labeled "AUDIO IN" and the
audio output jack on the CPU marked "line out", "spkr", or "headphones" (see Fig. 2).
Notes:
If all 3 jacks are available, use the jack marked "line out".
The "line out" jack is typically lime green and may be marked with this symbol
The "spkr" jack is typically orange, and may be marked with this symbol
The "headphones" jack may be marked with this symbol
VIDEO
OUT
AUDIO
OUT
12VDC
NTI
R
www.nti1.com
ST-C5VA-WL500
Local Unit
(Front View)
15HD Male
Video Connector
VIDEO
IN
AUDIO
IN
3.5mm Stereo Jack
1A
XTENDEX
TM
VA
Local Unit
Figure 2- Connect the Local Unit to the CPU
15HD Female
Video Connector
VEXT-6
Video Cable- SUPPLIED
SA-6-MM
Audio Cable- SUPPLIED
3.5mm Stereo Plug
ONE WILL BE MARKED "line
out" ,"spkr", "headphones"
5
15HD Male
Video Connector
PS/2 CPU
AUDIO CONNECTOR
line
out
OR WITH THIS SYMBOL