Related Manuals for Network Technologies XTENDEX ST-C6USBH-300
Summary of Contents for Network Technologies XTENDEX ST-C6USBH-300
- Page 1 ® XTENDEX Series ST-C6USBH-300 ST-C6USBHU-300 ST-C6USBH-IR-300 ST-C6USBHU-IR-300 300 FOOT USB, HDMI AND IR EXTENDER Installation and Operation Manual ST-C6USBHU-300 Local and Remote Unit MAN134 Rev Date 7/13/2011...
- Page 2 Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202. CHANGES The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the right to make changes in the product design without reservation and without notification to its users.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Introduction..................................1 Materials ..................................2 Connectors and LEDs ..............................3 Limitations ..................................4 Preparation for Installation .............................. 4 Installation ..................................5 Installing The Remote Unit ............................5 Installing The Local Unit .............................. 6 Connect the CATx Cables ............................6 Plug-in and Boot Up.............................. -
Page 4: Introduction
NTI XTENDEX 300 Foot HDMI and IR Extender INTRODUCTION The XTENDEX Series ST-C6USBH-300 CAT6 HDMI Extender (XTENDEX) provides remote KVM (USB keyboard, USB mouse and HDMI monitor) access to a USB computer up to 300 feet over CAT5e/6/6a/7 cable. Each extender consists of a local unit that connects to a USB computer and a remote unit that connects to an HDMI monitor and USB keyboard and mouse as much as 300 feet away via Category 5e,6, 6a or 7 twisted-pair cable. -
Page 5: Materials
NTI XTENDEX 300 Foot HDMI and IR Extender MATERIALS Materials Included with ST-C6USBH-300 kit: NTI XTENDEX Local Unit NTI XTENDEX Remote Unit 1-HDMI-3-MM 3 foot male-to-male HDMI video cable 1-USB2-AB-1M-5T 1 meter USB Type A male-to-USB Type B male cable 1-100VAC to 240VAC at 50 or 60Hz-24VDC/1.0A AC Adapter 1- Power Cord- country specific This manual... -
Page 6: Connectors And Leds
NTI XTENDEX 300 Foot HDMI and IR Extender CONNECTORS AND LEDS LABEL CONNECTOR DESCRIPTION 24VDC- 1.0A 1.0mm Power Jack connection jack for the AC adapter (only the Local or the Remote Unit needs to be powered, not both) IR Out 3.5mm Stereo Jack for connecting the IR Emitter (models with IR support only) RJ45 connector... -
Page 7: Limitations
NTI XTENDEX 300 Foot HDMI and IR Extender LIMITATIONS • The use of CAT5e or of any stranded cabling will reduce the maximum distance and resolution. PREPARATION FOR INSTALLATION • Locations should be chosen for the monitor that also has space to connect the Remote unit within the distance provided by the cables. -
Page 8: Installation
NTI XTENDEX 300 Foot HDMI and IR Extender INSTALLATION Installing The Remote Unit Position the Remote Unit such that the CATx cable, the monitor cable(s), and device cables can each reach the Remote Unit without putting strain on the cables. 2. -
Page 9: Installing The Local Unit
NTI XTENDEX 300 Foot HDMI and IR Extender Installing The Local Unit 1. Connect an HDMI-3-MM (supplied) or DVI-HDMI-xx-MM cable (page 2) between the CPU and the "HDMI In" connector on the Local Unit. 2. Connect a USB2-AB-1M-5T USB cable (supplied) between a USB port on the CPU and the “USB CPU” connector on the Local Unit. -
Page 10: Plug-In And Boot Up
NTI XTENDEX 300 Foot HDMI and IR Extender Plug-in and Boot Up Plug the power cord from the monitor into the power outlet. Connect an AC adapter power connector to the 24VDC port on either the Remote Unit or the Local Unit. Plug the AC adapter into a power outlet. -
Page 11: Infrared Control
NTI XTENDEX 300 Foot HDMI and IR Extender INFRARED CONTROL Model ST-C6USBH(U)-IR-300 includes ports for connecting an infrared emitter and receiver (included) to work in conjunction with the IR remote control used to operate the CPU. Connect the receiver to the “IR IN” port on the Remote Unit and the emitter to the “IR OUT”... -
Page 12: Mac Mode
NTI XTENDEX 300 Foot HDMI and IR Extender MAC MODE MAC Mode enables the user to connect the Local Unit to a MAC CPU. MAC Mode configures the Local Unit for passing mouse information to the MAC CPU. This is useful when the user wants to use mouse drivers provided by the mouse vendor, which allows the use of programmable functions for each mouse button. -
Page 13: Technical Specifications
NTI XTENDEX 300 Foot HDMI and IR Extender TECHNICAL SPECIFICATIONS Video Video Compatibility PC Resolution up to 1920x1200 @60Hz / HDTV resolution up to 1080p @60Hz Video Connectors HDMI Type A Female Input Video Signal TMDS Video Color Format Standard (24bit); Deep color (30,36bit);RGB; 4:2:2; 4:4:4 HDMI Version HDMI 1.3a DVI Support... -
Page 14: Interconnection Cable Wiring Method
NTI XTENDEX 300 Foot HDMI and IR Extender INTERCONNECTION CABLE WIRING METHOD The CATx connection cables between the Remote and Local are terminated with RJ45 connectors and must be wired according to the EIA/TIA 568 B industry standard. Wiring is per the table and drawing below. Pair 3 Pair 2 Pair 1... -
Page 15: Troubleshooting
NTI XTENDEX 300 Foot HDMI and IR Extender TROUBLESHOOTING Each and every piece of every product produced by Network Technologies Inc is 100% tested to exacting specifications. We make every effort to insure trouble-free installation and operation of our products. If problems are experienced while installing this product, please look over the troubleshooting chart below to see if perhaps we can answer any questions that arise.