Table of Contents
Advertisement
NTI XTENDEX Extenders
Installing The Remote Unit
1. Position the Remote Unit such that the CAT5 cable, the monitor cable, device cables, and the AC
adapter power connector can each reach the Remote Unit without putting strain on the cables.
2. Connect the monitor cable to the female 15HD video connector on the Remote Unit.
3. Connect the device(s) to the Remote Unit (see Fig. 6)(KVM models only).
a. Connect the keyboard to the purple female 6 pin miniDIN connector on the Remote Unit.
b. Connect the mouse to the green female 6 pin miniDIN connector on the Remote Unit.
4. If the Remote Unit has RS232 support, connect the remote user's RS232 cable from a touch
screen monitor to the RJ45 port on the Remote Unit using the DB9M-to-RJ45 adapter and patch cable
provided.
5. If the Remote Unit has audio support, connect the cable from the remote speakers to the 3.5mm
stereo audio jack with the speaker symbol on the Remote Unit. (See Fig. 7) Connect a microphone
to the 3.5mm stereo audio jack with the microphone symbol on the Remote Unit.
ST-C5KVMRS-1000S Remote Unit (Front and Rear View)
Front View of
Remote Unit
NTI
Network Technologies Inc
XTENDEX
6 pin miniDIN
Female Connector
Figure 6- Connect the extended components to the Remote Unit
R
Cat5 Patch Cable
(supplied)
DB9M-RJ45F Adapter
(supplied)
Rear View of Remote Unit
CAT5 Cable to
Local Unit
PS/2 MOUSE
PS/2 KEYBOARD
Remote User's Keyboard, Monitor, and Mouse
9
15HD Female
Video Connector
VGA
Multi-Scan
Monitor
Advertisement
Table of Contents
