Fiery KM-C3130 Configuration Manual page 96

4
4-38 Performing Setup from the Control Panel
Network Setup
Service Setup
Administrator E-mail Domain Name
Enter the name of the domain in which the administrator has an account. This is
typically the part of the e-mail address that follows the @ symbol. For example, in the
address , the domain name is
pat@test.com
The administrator authorizes a unique e-mail address to remotely administer the
E-mail Services via e-mail. This includes the Fiery Address Books, designed for use in
sending scan files to a particular e-mail address the user chooses at the Fiery S300
Control Panel, and in controlling user access to E-mail Services. If an error occurs
while you are executing a job via e-mail, the e-mail service sends an error message to
that administrator e-mail address. The administrator can authorize additional e-mail
addresses as administrators from this e-mail address.
Timeout (sec)
30–300 [60]
Enter the length of time, in seconds, that the Fiery S300 should try to connect to each
e-mail server before determining that the connection is unsuccessful.
Polling Interval (sec)
1–3600 [15]
If you have enabled auto-checking for new messages in the previous option, enter
the interval in seconds at which the Fiery S300 should automatically check for
new e-mail.
Max Scan File Size
0–15000 [1000]
Specify the maximum file size the Fiery S300 can send scans as an attachment. If the
scan file exceeds this maximum, the file will automatically be sent as a URL.
Exit Service Setup
This returns you to the main Network Setup menu. Choose Exit Network Setup.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in Network Setup; select No to return to the
main Setup menu without making any changes.
.
test.com