Exiting Setup - Fiery KM-C3130 Configuration Manual

5

5-39 Exiting Setup

RGB Source Profile
Rendering Style
CMYK Simulation Profile
CMYK Simulation Method
RGB Separation
Output for RGB jobs that you print to the final output device. Select Simulation to
simulate an output device that is not the device to which you are printing.
Output Profile
can be created and downloaded to the Fiery S300 with ColorWise Pro Tools. In local
Setup, profiles are listed by their names; in Remote Setup, profiles are listed simply as
Output-1, Output-2, and so forth.
Spot Color Matching
lookup table to print the best equivalents of PANTONE colors. When this option is
cleared, PANTONE colors are printed using the CMYK values defined in the
originating applications.
Exiting Setup
When you have finished specifying Setup options, click OK and close the Setup dialog
box. You are notified that the Fiery S300 must be restarted for the new settings to take
effect. You can restart now or later. If Command WorkStation is running, the
connection to the Fiery S300 is lost and you must log on again when the server
has restarted.
If you changed the network configuration or other settings affecting Windows NT
Workstation, you must restart Windows NT 4.0 for those changes to take effect.
After you have completed Setup and restarted the Fiery S300 for the first time, install
the user software for printing on remote workstations, as described in the
Installation Guide. To confirm the network connection and your Setup, print a test job
from a remote workstation.
—Specify the RGB source space to be applied to RGB data.
—Specify the Rendering Style to be applied to RGB data.
—Specify the simulation to be applied to CMYK data.
—Specify the simulation method to be used.
—This option defines how the Fiery S300 processes RGB jobs. Select
—Specify the output profile to be used for printing. Additional profiles
—When this option is selected, the Fiery S300 uses an internal
User Software