Fiery KM-C3130 Configuration Manual page 73

4
4-15 Server Setup options
System Time
Enter the correct system time. Enter the time based on the 24-hour clock in the form
HH:MM (Hours:Minutes). The time appears on the Job Log.
Print Start Page
Yes/No [Yes]
Specify whether the Fiery S300 should print a start page every time it restarts. The start
page displays information about the Fiery S300, including the server name, current
date and time, amount of memory installed in the Fiery S300, network protocols
enabled, and connections published.
Use Character Set
Macintosh/DOS/Windows [Macintosh]
Specify whether the Control Panel and Command WorkStation should use the
Macintosh, DOS, or Windows character set for displaying file names. This is
important if file names include accented or composite characters (such as é or æ).
For mixed-platform networks, choose the option that gives the best overall
representation of the special characters you use.
Enable Printing Groups
Yes/No [No]
Specify whether to enable printer groups for Member Printing. If you are
downloading fonts, set this option No. If you enable this option, you must use
Command WorkStation to define user groups and passwords. Users must then
enter their group name and password when they print.
No Account Printing
Disable/Enable [Disable]
Specify whether to enable account printing
Enable Printed Queue
Yes/No [Yes]
Specify whether to enable the Printed queue, which creates a storage location on
the Fiery S300 disk for recent jobs that were printed from the Print queue. Users with
Administrator or Operator access to the job management tools can reprint jobs from
the Printed queue without resending them to the Fiery S300. If you select No, jobs are
deleted from the Fiery S300 disk immediately after they are printed.