Fiery KM-C3130 Configuration Manual page 86

4
4-28 Performing Setup from the Control Panel
Network Setup
Service Setup
PServer Setup
Exit Bindery Setup
Add File Server
View Server List
Edit Connection
Bindery Setup
Remove File Server
Bindery Setup
Bindery Setup options
Bindery Setup
Use Bindery Setup if you have already configured one or more bindery servers (file
servers running NetWare in bindery emulation) with a Print Server and a Print Queue
for Fiery S300 jobs. Before entering bindery settings, be sure the Fiery S300 is
connected to the network and the NetWare file server is running. If Guest Login is not
supported, you need a valid user name and password.
The terms NetWare server, Novell server, and IPX file server are in common use
N :
OTE
and are used here interchangeably to mean the server on an IPX network running
Novell NetWare networking software.
Bindery Setup menu
Because you can set up more than one Novell server to handle Fiery S300 print jobs,
an additional menu is displayed for this purpose. The options are:
• Add File Server—creates a new file server connection to the Fiery S300. You can set
up a maximum of eight file server connections. After you have finished adding a new
server, you return to the Bindery Setup menu, where you can set up another server.
• View Server List—displays the list of file servers that have already been selected to
communicate with the Fiery S300.
• Edit Connection—lets you change the NetWare Print Server that will print to
the Fiery S300.
• Remove File Server—lets you disconnect the Fiery S300 from a file server to which
it is currently connected. Remove a file server when you want to reduce the number
of connections to the Fiery S300 or reassign the connection to a different NetWare
file server.
• Exit Bindery Setup—lets you exit this menu after you have added all servers, viewed
a list of file servers, or removed a file server from the list.
If you change your mind about any of the menus you have selected, use the
N :
OTE
Menu button to escape and return to the main Bindery Setup menu. To cancel all
changes, exit Network Setup and select No to Save Changes.