Fiery KM-C3130 Configuration Manual page 29

2
2-5 Fiery S300 on a TCP/IP network with Windows NT 4.0/2000/XP
Installing the Fiery S300 as a shared printer
The first step in creating a printer is installing the printer driver files, which give your
applications access to printer features. You can use the installation instructions in the
User Software Installation Guide
independently to the Fiery S300. However, if you are an administrator running a
Windows NT 4.0/2000 server or Windows NT 4.0/2000/XP workstation, you can
also create a printer and share it with clients on the network. This allows clients who
do not have permission to establish an independent network connection to the
Fiery S300 to print through the server.
You can specify sharing of the printer during installation of the Fiery S300 printer files.
If you have not yet installed the Fiery S300 printer files on the Windows NT 4.0/2000
print server computer, do so now, following the instructions in the
Installation Guide. During installation, enter the information necessary to share
the Fiery S300.
If you have already installed the Fiery S300 printer files on the computer you are using
as a Windows NT 4.0/2000 print server, see your Windows documentation for
information about sharing the Fiery S300.
If more than one Fiery S300 print connection is published (for example, if both the
Print queue and the Hold queue are published), you may want to create a printer for
each print connection, so you and other users can print to each connection directly.
When prompted to specify the printer name, enter a name that indicates the
Fiery S300 print connection.
for every workstation that will print directly and
User Software