Fiery KM-C3130 Configuration Manual page 15

1
1-3 Stages of installation on the network
C
ONNECTION
S
ERVER CONFIGURATION
F S300 S
IERY ETUP
C S
LIENT ETUP
UNIX
Summary of Fiery S300 network installation
Fiery S300
Network server
Fiery S300
Mac OS Windows
Fiery S300 available on the network
Prepare a network node. Connect the Fiery S300 to
the copier and the network. If you use a computer
running Command WorkStation software, connect
it to the network.
Configure UNIX, Windows NT 4.0/2000, and IPX
(Novell) servers to specify Fiery S300 print queues
and Fiery S300 users.
On the Fiery S300 Control Panel, configure, at a
minimum, the Server Setup, Network Setup, and
Printer Setup. Configure the remaining Setups.
At each computer from which users print to
the Fiery S300:
• Install the appropriate printer files and connect
to one or more queues.
• Install Fiery® utilities and an Internet browser
for those computers that will use them.
• Verify the Fiery S300 in the list of printers and
run a test print.