Fiery KM-C3130 Configuration Manual page 82

4
4-24 Performing Setup from the Control Panel
Network Setup
Service Setup
PServer Setup
NDS Setup
Before entering NDS settings, make sure the Fiery S300 is connected to the
network and that you have configured an NDS directory tree with a printer, print
server, and one or more Print queue objects for Fiery S300 jobs (see
To perform NDS Setup, you may need permission to browse the NDS tree. If
access to the print server is restricted, you need a login password.
The main objective of NDS Setup is to specify the print server object. In addition,
you can indicate the location of the Fiery S300 Print queues.
The terms NetWare server, Novell server, and IPX server are in common use
N :
OTE
and are used here interchangeably to mean the server on an IPX network running
Novell NetWare networking software.
Enable NDS
Yes/No [No]
Select Yes if the NetWare servers you will use to print to the Fiery S300 are running
NetWare in native mode.
Select NDS Tree
List of trees
Use the up and down arrow buttons to browse the list of NDS trees available to the
Fiery S300. Choose OK when you have displayed the tree that contains the printer,
print server, and Print queue objects you previously defined for the Fiery S300.
Your new NDS tree selection automatically overwrites any previous tree selection.
If you change the NDS tree selection and there are also current Bindery settings, you
are alerted that they will be deleted. If you continue with NDS Setup, you can replace
Bindery settings later. If you do not want to continue, press the Menu button to exit
NDS Setup.
page 2-13).