Fiery KM-C3130 Configuration Manual page 37

2
2-13 Fiery S300 on a NetWare network
Setting up a NetWare Print queue for bindery
For NetWare in emulation mode, the NetWare print server and the Fiery S300 Print
queue are created and configured from NetWare Print Console (PCONSOLE), a
NetWare utility that is stored in the NetWare PUBLIC directory.
As with NDS, you can create several NetWare entities on a Novell server, and you can
then select them in Network Setup (see
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, perform Network Setup (see
page 4-16), and verify that the settings reflect the entities you created in the NetWare
administrator utilities (see
For printing to the Fiery S300, connect all Windows clients to a NetWare server
N :
OTE
and permit them to connect to the Netware print server or servers on which you
defined a NetWare Print queue for the Fiery S300.
After the Novell server and the Fiery S300 have been set up, client Setup consists of:
• Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 9x/Me workstations, load both the IPX/SPX-compatible protocol and
the Client for NetWare Networks from the Network Control Panel.
On Windows NT 4.0/2000/XP workstations, install Client Services for NetWare.
Use the CSNW option in the Control Panel to set printing options and specify a
preferred NetWare server.
• Setting up the Fiery S300 as a PostScript printer by installing a PostScript printer
driver and the Fiery S300 PPD (PostScript printer description).
• Adding a network port and connecting the workstation to one or more NetWare
queues that have been defined for the Fiery S300.
• Installing Fiery S300 software, such as color reference files.
For details, see the
page 4-23).
page 2-10).
User Software Installation Guide.