Fiery KM-C3130 Configuration Manual page 30

2
2-6 Setting up Network Servers
Configuring clients of a Windows NT 4.0/2000 server
Each client of a Windows NT 4.0/2000 server is already using a network protocol to
communicate with the server. Each client can print to the Fiery S300 if it has been
shared by a Windows NT 4.0/2000 server or Windows NT 4.0/2000/XP computer.
In that case, the client does not have to use the same network protocol to connect to
the Windows NT 4.0/2000 server as the server uses to communicate with
the Fiery S300.
T
O CONNECT AND PRINT TO THE
W NT 4.0/2000
INDOWS
• For Windows 9x/Me clients: Before printing, double-click the Windows NT 4.0/2000
server icon in the Network Neighborhood window, and then double-click the
printer name.
You are prompted to set up the printer. When you choose to set it up, the Add Printer
Wizard dialog box appears. Follow the procedures in the
Installation Guide.
• For Windows NT 4.0 clients: Before printing, connect to the print server computer and
select the Fiery S300. Right-click and choose the Open command.
When prompted, click Yes to have Windows set up the printer.
• For Windows 2000/XP clients: Before printing, install the printer driver with the
User Software CD and configure the port.
After clients have selected the printer, they can choose it from the Print Setup, Page
Setup, or Print dialog box of their application. Clients can change printing options for
their own job, but printer properties appear dimmed, and unavailable for changing.
When a client chooses Print, the job is transmitted to the Windows NT 4.0/2000
print server, and from there to the selected print connection on the Fiery S300. The
job is listed in the Print Manager on the client workstation, and the administrator can
track it in the Fiery S300 window of the Print Manager on the Windows NT 4.0/2000
print server.
F S300
IERY SHARED BY A
SERVER
User Software