Fiery KM-C3130 Configuration Manual page 109

5
5-5 General Setup options
If you are using local Setup, click Modify, click Change, and then type the Server
Name in the Computer Name field.
Do not use the device name (
N :
OTE
one Fiery S300, do not give them the same name. Windows NT 4.0 does not support
more than one computer with the same name in the same workgroup or domain.
Time and Date
Enable Printed Queue
location on the Fiery S300 disk for recently printed jobs. You can reprint jobs from the
Printed queue without resending them to the Fiery S300. If the Printed queue is not
enabled, jobs are deleted from the Fiery S300 disk immediately after they are printed.
Jobs Saved in Printed Queue
queue. Jobs in the Printed queue take up space on the Fiery S300 hard disk.
Delete Scan Jobs
disk. Choose After 1 week to delete scan jobs after 1 week. Choose Manually to delete
scan jobs manually on a job-by-job basis. Click Delete Scan Jobs Now to delete all scan
jobs immediately.
Use Character Set
should use the Macintosh, DOS, or Windows character set for displaying file names.
This is important if a file name includes accented or composite characters (such as
é or æ). For mixed-platform networks, select the setting that gives the best overall
representation of the special characters you use.
Print Start Page
turned on or restarted. The Start Page displays information about the Fiery S300,
including server name, current date and time, amount of memory installed, network
protocols enabled, and print connections published.
—Enter names, phone numbers, and e-mail addresses of contact people at
Support
your organization who provide support for the Fiery S300 and the copier. In remote
Setup, use the Support tab.
31C-M
—Specify the system time and date, which are recorded on the Job Log.
—Specify whether to enable the Printed Queue, a storage
—Specify the number of jobs to be stored in the Printed
—Specify how often to delete scan jobs from the Fiery S300 hard
—Specify whether the Control Panel and the job management tools
—Specify whether the Fiery S300 should print a start page when it is
) as the server name. If you have more than