Fiery KM-C3130 Configuration Manual page 100

4
4-42 Performing Setup from the Control Panel
T C S
O ACCESS OLOR ETUP OPTIONS
In the list of options that follows, default values, where applicable, appear in
square brackets.
RGB Source Profile
EFIRGB/sRGB (PC)/Apple Standard/None [EFIRGB]
The RGB source is the color space used to control color for conversion from monitor
to printed output. EFIRGB is based on the reference points used in the creation of the
Fiery S300 software. sRGB is based on an average of a large number of PC monitors.
Apple Standard is the standard reference point for Apple's ColorSync software.
Rendering Style
Photographic/Presentation/Abs. Colorimetric/Rel. Colorimetric [Presentation]
The color rendering dictionary (CRD) defines how colors are converted from the RGB
color space to device CMYK. Photographic, designed for images, retains the relative
balance between colors to maintain the overall appearance of the image. Presentation,
designed for bright colors, produces the saturated prints needed for most business
presentations, but handles photographic images the same way as the Photographic
CRD. Absolute Colorimetric provides the closest match to the CMYK device
being simulated, including rendering the paper color as the background. Relative
Colorimetric provides a close match to the CMYK device being simulated, regardless
of the media used.
CMYK Simulation Profile
SWOP-Coated (EFI)/DIC (EFI)/Euroscale (EFI)/None [SWOP-Coated (EFI) in North
America, Euroscale (EFI) elsewhere]
CMYK simulation allows color correction to simulate printed output on a commercial
press, so that the Fiery S300 output can be used for proofing. The SWOP-Coated
standard is used in the United States, DIC in Japan, and Euroscale in Europe. Custom
simulations are user defined and named. The simulations provided with the Fiery S300
have the designation "EFI" after their names.
If users create and load custom simulations on the Fiery S300 with ColorWise Pro
Tools, these also appear in the list of simulations. A custom simulation can be selected
as the default simulation. For more information about custom simulations, see the
Color Guide.