5
5-13 Protocols
TCP/IP
Specify TCP/IP settings. The current settings for IP address, subnet mask, and default
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 2.
The Fiery S300 requires a unique, valid IP address. You can set a static address
or specify that the Fiery S300 use DHCP or BOOTP to obtain IP addresses
automatically.
If you specify the DHCP or BOOTP protocol, the Fiery S300 restarts when you
N
:
OTE
save your changes and exit Setup. Allow the Fiery S300 to restart and return to Idle
before printing a Configuration page or proceeding with any other operations.