Mounting Wood Shrpening; Plugging In Motor - Craftsman 113.239420 Owner's Manual

item Part Name Qty.
A Leg ................................................................ 4
B * Screw, Truss Hd. 1/4-20 x 5/8 ..................... 28
C * Nut, Hex 1/4-20 ............................................ 28
D * Lockwasher, 1/4 External ............................ 28
E Channel, Support .......................................... 2
F Stiffener ........................................................ 2
(3 Stiffenol, Side ............................................... 2
H Stilfener, End ................................................ 2
J * Screw, Pan Hd. Ty A N8 x lj2 ...................... 4
K * Nut, Hex Hd, 3/8-16 ...................................... 8
L * Foot, Leveling ............................................... 4
* These parts contained in Loose Part bag #508411.
"ii ,'21
_--L
MOUNTING WOOD SHAPER ON FLOOR STAND
1. Three mounting holes are provided in the base of the
shaper for the purpose of mounting it securely on a
substantial tool stand with screws or bolts.
2. The tool stand should be high enough so the top surface
of the shaper table will be 35 to 37 inches above the
floor, The shaper must be mounted to allow the motor
to overhang rear edge of toot stand.
CAUTION: The shaper must be mounted on a
substantial tool stand and secured so there is no
possibility of tipping, The Shaper must be positioned on
the tool stand so that the spindle pulley is guarded from
the bottom,
Place the Shaper on the Steel LEGS, Position as shown,
and align mounting holes. Secure with 3 ea. 5/16" x 18
x 3" screws; washers and nuts,
GUARD
PLATE
I
NO, 8X I/2 IN,
pPAHPLIEDHDo SCREW
WITH LEG SET)
PLUGGING IN MOTOR
1. Find plastic cable hanger from among the loose parts.
2. Route the motor cord behind the motor mount, across
the top of the Leg Set and plug it into the receptacle in
the side of the switch box.
3. Bring the power cord alongside the motor
cord.., wrap the plastic cable hange; around the cords
and attach the hanger to the top of the Leg Set.
CABLE
CORD
MOTOR CORD
10 .