Enterasys MicroMMAC-T User Manual page 27

All Station Port menus, regardless of port status, contain the following selections:
•
•
•
•
The Ring Port Menus
Clicking on a ring port (
which allows you to view the status of the selected ring port, as well as enable or
disable the port. The ring port menu offers the following selections:
•
•
Additional menus (e.g., FDDI) and/or menu options may be available from the Chassis
View if you have a BRIM installed in the MicroMMAC-T. These menu options are
NOTE
discussed in the Bridge/Router Interface Module (BRIM) User's Guide included in
your documentation set.
Port Status Displays
When you open the Chassis View window, each port on the MicroMMAC-T will
display its Admin/Link status (defined below); to change this status display,
select one of the options on the Port Status menu, as described in the following
sections.
Selecting a Port Status View
To change the status view of your ports:
1. Click on Port Status on the menu bar at the top of the Chassis View window;
2. Drag down (and to the right, if necessary) to select the status information you
Viewing Chassis Information
Enable/Disable, which allow you to administratively enable or disable the
selected port. See Enabling and Disabling Ports,page
Port Map..., which allows you to enable or disable port mapping for the
selected port. See Enabling and Disabling Port
details.
Link Trap..., which allows you to enable or disable link traps for the selected
port. See Enabling and Disabling Link
Ring Out Enable/Disable, which allow you to switch the function of a station
port to that of a ring-out port. See
details.
Ring Port Status..., which invokes the Ring Port Status window. See
Ring Port Status,page
Enable/Disable, which allow you to administratively enable or disable the
selected ring port. See
the Port Status menu will appear.
want to display. The port text boxes will display the appropriate status
information.
The MicroMMAC-T Chassis View
Traps,
Ring Out Enable/Disable,page
) on a module will display the ring port menu,
2-21, for details.
Enabling and Disabling Ports,page
2-31, for details.
Mapping, page 2-28, for
page 2-29.
2-32, for
Viewing
2-31, for details.
2-9