Enabling And Disabling Link Traps At The Board Level; Setting Token Ring Boards To Automode - Enterasys MicroMMAC-T User Manual

The MicroMMAC-T Chassis View
3. Click on the Link Trap Enable radio button to activate link traps for the port, or
4. Click OK. Link traps for the selected port will now be enabled or disabled as

Enabling and Disabling Link Traps at the Board Level

You can quickly enable or disable link traps for all ports on a board by selecting
Enable Link Traps or Disable Link Traps from the Board menu. To do so:
1. Click on the desired Board index in the Chassis View window. The Board
2. Click on Enable Link Traps or Disable Link Traps, as desired.
Link traps will be enabled or disabled for all ports on the selected board.

Setting Token Ring Boards to Automode

By selecting Set Board to Automode from the Module menu, you can quickly
configure a module in the HubSTACK to operate according to its default
hardware settings. To set a module to AutoMode:
1. Click on the desired Module index in the Chassis View window. The Module
2. Click on Set Board to AutoMode to enable the AutoMode setting.
3. Click on Yes to select AutoMode, or No to return to the Chassis Status
2-30
Figure 2-16. The Link Trap Window
the Link Trap Disable radio button to turn off link traps.
desired.
pull-down menu will appear.
pull-down menu will appear.
A pop-up window will appear, asking whether you wish to set the board to
AutoMode.
window.
Managing the Hub